Choose your Base:
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-VND-3-6.webp?v=1669916703)
VND 3-6
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-Thread-Base.webp?v=1669916703)
82mm Thread Base
Add your Stage 2 Filters:
![](https://cdn.shopify.com/s/files/1/1050/9944/files/ND16.webp?v=1669916703)
ND16
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-BlueMorphic.webp?v=1669916703)
BlueMorphic
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-GoldMorphic.webp?v=1669916703)
GoldMorphic
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-Mist.webp?v=1669916703)
Mist
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-Mist-H.webp?v=1669916703)
Mist-H
Add Matte Box:
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-Hood.webp?v=1669916703)
Recon Hood
User Guides:
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-User-Guide-VND.webp?v=1669921512)
STEP 1:
Unthread Defender back plate from Recon VND.
STEP 2:
Thread Recon VND onto camera lens. Use Step-Up Rings to adapt to lenses other than 82mm.
STEP 3:
Remove Defender from front of Recon VND.
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-User-Guide-Hood.webp?v=1669921512)
STEP 1:
Unlock the Bronze Hood Rotation Lock lever.
STEP 2:
Hold down the Gold Release Button and Fit the Mattebox onto the VND or the Thread Base.
STEP 3:
Once Fitted onto the VND or Thread base, release the gold button and the Mattbox should be securely in place.
STEP 4:
Rotate the Mattebox to your desired angle and lock the bronze Hood Rotation lever.
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-User-Guide-Flag.webp?v=1669921512)
STEP 1:
Loosen Flag-Lock Knob.
STEP 2:
Insert Flag into hinge at 45 degree angle until flush.
STEP 3:
Adjust angle of flag.
STEP 4:
Tighten Flag-Lock Knob.
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-User-Guide-Stage-2-Filters.jpg?v=1669921512)
STEP 1:
Pinch attachment clips with thumb and pointer finger.
STEP 2:
Insert filter into Recon VND or Thread Base.
STEP 3:
Release Attachment Clips.
![](https://cdn.shopify.com/s/files/1/1050/9944/files/Recon-User-Guide-Thread-Base.webp?v=1669921512)
STEP 1:
Pinch attachment clips with thumb and pointer finger.
STEP 2:
Insert filter into Recon VND or Thread Base.
STEP 3:
Release Attachment Clips.